NANOVIP CUBE NANOVIP TWO

POWER AND HARMONICS ANALYSER

NANOVIP/CUBE FOR SINGLE PHASE AND UNBALANCED THREE PHASE SYSTEMS

NANOVIP/TWO FOR SINGLE PHASE AND BALANCED THREE PHASE SYSTEMS  

NANOVIP/CUBE and NANOVIP/TWO can measure more than 600 parameters and show them in a big high contrast LCD display.

Both products measure the Harmonics up to the 50th component, and DC current (with a special CT clamp).

The USB port and the dedicated software called NANOSTUDIO assure the complete visualization of the graphics and the deep analysis of the data, when downloading a survey. Data will be transferred from a 2GB microSD to the hard disk of your PC.

High portability, excellent performances, and the best price/performance ratio in the market: NANOVIP/CUBE and NANOVIP/TWO should be included in all technicians� toolkits.

REAL TIME MEASURES

Real time measures of: Volt, Ampere, Watt, VAr, VA, PF, Hz, kWh, kvarh (inductive/capacitive), instant values /min/max/average, energy counters of the energy consumed and generated in the whole three phase system and on each line.
The measures are in RMS, precision class is 0.5.
Both NANOVIP/CUBE and NANOVIP/TWO can measure DC current (by using special Hall뭩 effect CT clamps).
Automatic set-up of the connected CT clamp: it is no more required the manual set-up to the user. 

QUALITY OF THE ENERGY ANALYSIS

뷖urrent and tension Harmonics measured on each phase and on the neutral wire.
뷫nbalance of the tensions of three phase systems.
뷥ower supply interruption and high peak tension.

뷖onformity test to the EN 50160.

SPECIAL FUNCTIONS

� Power Supply:  4 batteries AA NiMh 2100mAh

� Battery duration: >24  hours  
 
� Voltage inputs (CUBE: 3 channels + 1 Aux; TWO: 1):  Phase - phase: 1000Volt AC  Phase - neutral: 600Volt

� Input voltage Impedance:  4MOhm
   
� Current (CUBE: 5 channels; TWO: 1 channel): Maximum displayed value: 500 kA 

� Input current Impedance: 10kOhm

� Display:  LCD 68x68mm

� Precision: Class 0.5  (EN 62053-21)

� Voltage input overload:  Max  1200Volt phase-phase - 700Volt phase-neutral

� Total scales: 2 voltage scales, 4 current scales

� Scale change: Automatic

� Memory:  2GB microSD

� Instrument Dimensions :   203x116x53 mm

� Instrument Weight: 580 g 

� Protection degree: IP30

� Operating Temperature Range: -10캜 +55캜

� Storage Temperature Range: -20캜 +85캜

� Relative Humidity Range (RH%): 20% - 95%

� Condensation: not allowed


PRIMARY MEASUREMENT ACCURACY

� Measure method: 128 samples/period and analogic/digital conversion.

� Sampling frequency: 6400 cycles/second at 50 Hz (7680 cycles/second at 60 Hz).

� Number of samples: 128 each period.

STANDARD AND REGULATIONS